Looking at the brake booster kit ws24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends.
Category: dear welder series
Paul Horton’s replies to actual tech emails.
Dear Welder Series… hairpins?
Hi I am trying to put together a list of items to purchase from you good people , and I saw on one of your Welder Series videos you were making a set of hair pins.
Dear Welder Series… Mustang II in a Buick?
This '50 Olds will be similar to your Buick in that a section of 2x4 tubing would be spliced into the stock frame.
Dear Welder Series… upside-down four link brackets?
Dear Welder Series...
I am considering installing a 4 bar link rear suspension under my '46 Ford Truck.
Dear Welder Series… Watts link brackets?
I'm wondering about your brackets 21842. I'm building a watts link and want to use a bracket similar to what you have. But can I simply bent one backwards and have a left and right side bracket?
Dear Welder Series… Mustang II A Arm Question
I have tubular front a frames, but the bottom looks a lot bigger than the width of the lower a frame mount.
Dear Welder Series… crossmember only?
Dear Welder Series...
Can I buy just the lower MII crossmember?
Dear Welder Series… sway bar mounting question
I've been looking at your sway bar kits for a rear application. Is there any provision for mounting through the frame rails but having the arms and links on the inside of the frame rails?
Dear Welder Series… S10 four link?
Good morning, I want to install a 4-link kit on my 95 S-10. I was hoping you could recommend a kit.
Dear Welder Series… 1934 Dodge coupe MII
Dear Welder Series...
I am interested in your weld-it series x-member, my question is can it be flipped around to create a rear steer x-member?
Dear Welder Series… 1954 Chev MII
I'm looking at your mustang II crossmember kit, and I'm
wondering if it would be appropriate for a 54 Chevy that I
want to bag and have lay on the ground.
Dear Welder Series… 1964 Falcon MII
I am fairly sure the 56" cross-member kit is the correct one for use on my 64 Ford Falcon 2 door hardtop, but is there anything else I should be aware of?
Dear Welder Series… 1956 Studebaker Transtar
Hi Paul, I talked to you about my '56 Studebaker P. U. and a front end coilover cross member kit
Dear Welder Series… adjuster studs
Are the adjuster studs available with a flat base, so they could be welded to a flat plate rather than a tube?
Dear Welder Series… pro street rear four link
I have 2 questions on your Pro Street Rear 4 link kit.
What is the sidewall thickness of the link bars (is this the same for all of your 4 links?)