Dear Welder Series…
I am putting a 351m in a 2003 crown vic front suspension, any sugestions on motor mounts?
Vern, our Ford mounts are for blocks that have 2 vertical mounting holes on 7″ centers. If your block is like this, either kit will work well.
I hope this helps.
Grant Schwartz has sent in some pictures of his 302 installation into a 1974 MGB. He modified the 3/8″ engine block plate and welded a section straight down from the mounting holes.
Lowdown Hot Rods installed a set of our Ford engine mounts... follow along!
I am fairly sure the 56" cross-member kit is the correct one for use on my 64 Ford Falcon 2 door hardtop, but is there anything else I should be aware of?