Greg sent some pictures of how he mounted a Welder Series booster bracket under his dash... thought it would be good to share them!
Looking at the brake booster kit ws24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends.
Salty (on the H.A.M.B.) is doing some major updates to his 1950 Chevy pickup truck, and documenting it all in this thread. He called a little while ago and asked if we could come up with a solution to mount his booster under the floor, but his frame was very narrow. Here’s a photo of what we came up with:
You can see how he brought the booster bracket up over the top of the frame rail until the booster was very close the the inside of the rail. He did the same thing to the pedal bracket – the bent plate actually sandwiches the pedal against the inside of the frame rail… you can’t get much tighter than that!