I really want to have the three inch tube axle mount cut strait at 90 degrees from the shock mount so I can mount a flat plate to the top and U bolt it to a 1968 Camaro factory spring perch.
Category: dear welder series
Paul Horton’s replies to actual tech emails.
Dear Welder Series: parts for 1971 Mustang?
I am restoring a 1971 mustang coupe. I would like to add a 4-link rear suspension and a coil over front suspension.
Dear Welder Series… Pro Street Rear Sway Bar?
I am running a blown 440 in it and she can be allot to handle at time. I can feel it sway back and forth when I have in it hard. Do you have something that will work for me?
Dear Welder Series… small vs. big bushings
I'm wondering what would be the reason for choosing a large bushing kit over the standard bushing kit? Is one better than the other?
Dear Welder Series… firewall mounted master cylinder
I have all the parts in my shopping cart except the tube that holds the bushing. Not sure which one I should order.
Dear Welder Series… 60″ Mustang II Questions
When the crossmember is wider does that push the mounting points for the control arms out too?
Dear Welder Series… stock ’32 Ford brake pedal bracket?
Can you tell me if I could bolt or weld on the brake/master cylinder bracket to the original unboxed 1932 ford chassis?
Dear Welder Series… Ford engine in a Mazda?
I own a small automotive repair shop and I have a customer that's wanting me to install a Ford 302 in his 1989 Mazda B2200 mini truck.
Dear Welder Series… Mustang II on a ’30 Chev?
I am wondering if your Mustang 2 crossmember will work in a 30 Chev.
Dear Welder Series… Dodge booster bracket?
I need a brake master cylinder mount for my 62 Dodge D300 Truck. It has a 4 bolt Master Cylinder that is impossible to find and not very good when you do find one.
Dear Welder Series… Mustang II on a Toyota Pickup
Hello, I'm planning to build a full 2x3 frame for a pickup and looking at your MII cross members I think they would work for my application but I have a few questions...
Dear Welder Series… slamming a ’53 Dodge PU
I would like an 8" c notch kit, I will need two of the the shock mount brackets and whats your feeling on slamming the front leaf spring straight axle setup.
Dear Welder Series… air ride for triangulated four link?
Can I put air ride on your triangulated four link kit?
Dear Welder Series… Triangulated Four Link For An F100?
Will the shock brackets accommodate a coil over after I decide what to use for suspension? I am not sure if I am going air-ride or coil over’s yet.
Dear Welder Series… MII On 1948 Stude Starlight Coupe?
I'm building a 1948 Stude. Starlight Coupe. Can this crossmember be used on this car?