Garth knows our products so well that he was able to recall a discontinued piece that's tucked away on the bottom shelf!
I really want to have the three inch tube axle mount cut strait at 90 degrees from the shock mount so I can mount a flat plate to the top and U bolt it to a 1968 Camaro factory spring perch.
Made from 3/16" folded steel, these brackets are available individually or as part of a coilover bracket kit.
Will the 3" bracket on the triangulated four link kit work on a 9.25 rear end out of a Dodge Dakota?
Do you make any parallel 4-bar axle brackets designed for the 2 3/4" S/10 Blazer axle?
This is the axle bracket assembly we used on the '32 Build.
John (president of the Central Florida Street Rod Association) sent me this picture of a Welder Series triangulated rear axle bracket he modified into a lower coil over bracket. I thought the job was so well done it needed to be shared!
If you have used our parts in a unique way, please let me know. John, there is $5 on your account for letting us use the picture.
Since John modified this axle bracket, we have introduced a shock/ coilover axle bracket: http://220.127.116.11/online-store/axle-bracket-kit-for-coil-overs/