Dear Welder Series… What measurements or info is required so you might be able to tell me which mustang ll kit I would need to use in a 1950 Studebaker champion 2 dr coupe and a starlite coupe. Would a 1948 starlite use the same kit as the 50? thnx Dear Roger… Roger, there are …
Dear Welder Series… Model A front four bar bars
Do you make front four bar links 7 degree (custom length) for 31 model A?
Dear Welder Series… 1965 Ranchero rear suspension?
I am interested in getting modern suspension on the rear of it. Any recommendations? 4 link?
Dear Welder Series… Welder Requirements?
Could you share a few pointers for choosing a decent TIG welder appropriate for a home shop?
Dear Welder Series… Can I reuse my frame rails?
Greg has some questions about fixing an old junkyard Mustang II installation on a 34 Plymouth, and whether he can make use of anything that's currently there.
Dear Welder Series… Custom front four link bars?
Do you make front four bar links 7 degree (custom length) for 31 model A?
Dear Welder Series… sway bar question
I am interested in your anti roll/sway bar kit you have, I am wondering if it is good for the street or only for racing.
Dear Welder Series… 1974 Triumph Spitfire Mustang II?
I have a 1974 triumph spitfire with a sbc, it has a frame width of 19" and a track width of 49.5", i would like to install your mustang 2 crossmember do you see any reason why your 56" would not work if I narrow it?
Dear Welder Series… 1956 Buick rear four link parts?
Do you offer a four link kit for my Buick so I can use the stock X member?
Dear Welder Series… rear frame parts for 1954 Chevy truck
I'm interested in buying C-notches, air bag brackets, shock brackets and the 4 link that you told me about and whatever else you think I need for the rear end.
Free Mag With Order!
Canadian Hot Rods magazine has dropped off a few boxes of their latest issue for me to include in parts orders! They won’t last long… check out their Facebook page: https://www.facebook.com/pages/Canadian-Hot-Rods-Magazine/450463125065?fref=ts Thanks CHR!
New Nailhead Engine Mounts!
New engine mount kit for Buick nailheads.
Narrow Mustang II Crossmember Install – 1951 Prefect
It's for a 1951 Prefect, and the finished track width ended up close to 48", with 5/8" narrowed control arms.
Dear Welder Series… Rubber transmission mount with urethane engine mounts?
I've seen that you don't want to mix solid mounts with rubber mounts. For instance I have a rubber trans mount, so I wouldn't use solid motor mounts. Any idea how the urethane mounts would fit into the equation?
Dear Welder Series… thanks for sending me three cats.
Dear Welder Series… Just wanted to say thanks again for a smooth transaction. Also wanted to let you guys know I got 3 catalogs with my order, not a bother really but thought I’d let you know so you’re not wasting them! Dear Karman… Thanks for this note, Karman. We send the catalogs because customers …