Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Transmission Mount, Welded Tube w/Bushings & Frame PlatesProduct DetailsBrand: Welder Series Inc.MPN: 216350Country/Region of Manufacture: CanadaThis kit will mount a GM insulator between your frame rails or into your center section. The tube is 1" heavy wall DOM, 17-3/4" C-C. It will work in frames from 20" to 29-1/2" wide, or 37-1/2" wide with the longer frame plates. Support plates are included with the longer plate option.
The bolted in tube means you can drop your transmission straight down if you need to remove it. Urethane bushings isolate some vibrations. 1/2" hardware for the bushings is included.
The transmission mount and gussets come unwelded, but we can weld them for an additional charge. Select "Yes" under the "Weld Transmission Plate" option.
Included:
1x Welded 1" bar
2x Urethane bushing kits
4x Frame plates
1x Transmission mount plate
2x Gussets
2x 1/2" bolts & nuts
Universal Engine Mount Kit, Small or Big Block Chev, PRC$75.00Universal Engine Mount Kit, Small or Big Block Chev, PRSupports the engine on the frame mount, not a thru-bolt.We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
