Tag: clutch pedal

Dear Welder Series… brake pedal/clutch for Model A?

Dear Welder Series…
Hey there,
I’m looking to order a pedal assembly but I’m having a hard time finding what I need.  I’m looking for a ready to weld brake pedal/master cylinder kit that includes the clutch pedal that works with a Model A frame.  I remember seeing it on your site some time ago but now I can’t find it.  If you can send me a link or give me some information it would be much appreciated!  Also a price & shipping to Sask would be great.

Thanks guys,

Dear Nathan…
There are a couple of ways to do this with Welder Series kits, Nathan. Because the frame is narrow, it’s not easy to have room for the pedals, exhaust, and transmission (and linkage), so we use the kits that move the master a little farther from the frame rail than the Model ‘A’ kit.  Look at the options menu and the pictures. One is at http://welderseries.com/Brake-Pedal-Master-Cylinder-Bracket-32-Ford-p50683993.

Another way is by moving the master cylinder back from the pedals. Again, see the options and the pictures at http://welderseries.com/Booster-Bracket-&-Pedal-Mount-Under-Seat-Mount-p50666963

Lowdown Hotrods mounted the bracket behind a Welder Series transmission mount crossmember, as shown in the thumbnail picture at http://welderseries.com/Formed-Brake-Booster-Bracket-p50737621

Pricing is at each product in the store when you choose from the options menu. Freight is at http://welderseries.com/contact-us/. Shipping prices are as follows: 10% of the order, minimum $15, maximum $60. We use UPS or Canada Post for Canadian shipments.

Thanks for looking at Welder Series parts.

Paul Horton

Dear Welder Series…
Thanks for the speedy reply on this!

I think the first link in your reply would be best suited for my needs. It says it’s for a 32 but I think I could make that work. Question though, how does a guy typically mount it to the frame rail? Is it just meant to be butt welded on? Just having trouble visualizing this. Maybe if you had a couple pictures that would help.

Dear Nathan…
The bracket would weld to a boxed section of frame rail.  It would be best to have the body on the frame so you can determine where the pedal will come through the angled toe-board.  If your firewall goes right down to the frame, a slot in the floor might be better.  We can substitute a straight pedal in this case.  http://welderseries.com/Brake-Pedal-Straight-p50755047. Sorry, I don’t seem to have an installed picture.


Dear Welder Series… two Model ‘A’ pedal questions

Dear Welder Series…
I am building a Model A style frame and I am going to use manual brakes on it. Which master cylinder bracket kit and pedal should I use?


Dear Ryan…
If you are using an automatic transmission, the WS13704 kit was designed for the Model ‘A’.  

It is available ready-to-weld or welded.

Is this the frame that you got the frame curves for?

Thanks for looking at Welder Series, Ryan.

Paul Horton


Dear Welder Series…
Great products, great videos and product info on YouTube.

Can you recommend which master mounting bracket and pedal to use for a
model A, and is there one available that has both the brake and clutch

Thanks Alan

Dear Alan…
Thanks for looking at our parts, Alan. Check out 20281. Any clutch and brake is very crowded in a Model ‘A’. We can swap the offset brake pedal for one with no offset. Then you can bend both pedals symmetrically to go around the steering column.


I hope we can help you with your project.

Paul Horton