Steven sent these pictures back at the end of December, and sine he was the only person who sent pictures, he “wins” the $50 credit on his account! Nice work, Steven.
Exchange rate = ~20% discount on retail price
The exchange rate saves you money on chassis parts!
Driveshaft angle & phasing video
If you’ve been baffled by a driveline vibration, this video explains what happens when the angle between the transmission and pinion are off or out of phase.
Dear Welder Series… Duramax engine mounts?
Dear Welder Series… Will the LS200 mounts also bolt to a 6.6 duramax block? If you don’t know, what are measurements between the center of the holes? Can you make custom? Chris Dear Chris… Chris, I don’t know if the LS200 will fit the 6.6 Duramax, but the hole centers in the mount are very …
Dear Welder Series… scrap motor mounts
Email conversation with a customer who is wondering whether our mounts are strong enough for his 600hp engine. Other customers with twin turbo big blocks say "yes".
Remembering
I will be shutting the phones off from just before 11:00am until 11:10 to observe Remembrance Day ceremonies. Thanks Grandpa, and everyone else who has served in the interest of peace. Lest we forget. https://www.cbc.ca/news
Dear Welder Series – triangulated upper bar location
Dear Welder Series… I am researching the install of your Triangulated Four Link on a 57 Pontiac. Do the rear mounts of the upper bars need to be on top of the axle tube? I noticed, even in the pictures of some installs on this site, that some rear upper bar mounts are on the …
Giving thanks
Today is Thanksgiving in Canada, so the shop is officially closed while we give thanks to God for many many blessings and benefits. Paul, Dorothy, and DW Horton
Sway bar used on Corvette IFS in 1942 Chevy pickup
Here are some pictures of the installation of a universal sway bar on a 1942 Chevy pickup. I installed it to the rear of the a arm because it gave me much more room. It was going to be very close to and possibly hitting on the tie rods for the rack and pinion steering. …
Welding With DW
I’ve put the welding tips videos in a playlist on YouTube… I hope it’s helpful, or at the very least entertaining. Not the most entertaining thing you do all day, but maybe somewhere around the 9th entertaining.
Pricing
October 1st, 2005 is the date Welder Series officially established the majority of the prices in our catalog. We were thinking about it just now, and can’t remember too many products with price increases in those nine years. In fact, a good number of prices have actually been lowered as we worked with a new supplier, or …
1934 Plymouth Mustang II Installed
I recently made the front clip for my project (1934 Plymouth 2 door sedan). It was a pleasure using your Mustang II crossmember kit! My job was easy because the rails are level, square and plumb but the directions were a great help and easy to follow. Thanks for a great product! Jeff You can …
Dear Welder Series… JeepRod Mustang II?
Dear Welder Series… I am building an army willys jeeprod and I plan to put a mustang II suspension in front of grill. 30 1/2″ outside frame to outside frame. Money is limited so what would a complete kit cost me. I could not find any complete kits on your site. Thanks and God bless. …
Dear Welder Series… Mustang II control arm holes
Dear Welder Series… On the coil over shock crossmember it shows a 1/2 hole for the lower a-arm, the lower a-arm pivot bushing on my lower a-arm requires a hole 1 3/8 hole. Is that going to work on this crossmember?? Dear Len… Len, the 1/2″ hole is stock Mustang II. Many aftermarket a-arms use …
A&W Cruise Night
I brought my 7 year old Ruby to the local A&W last night for the cruise… grabbed some burgers, root beer, and gave her the camera. I enjoy seeing what she finds interesting, and I didn’t omit any pictures other than some really fuzzy duplicates and a shot of a license plate.