Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Driveshaft Loop KitProduct DetailsBrand: Welder SeriesCountry/Region of Manufacture: CanadaThickness: 3/16"A unique driveshaft loop to tie in to your center section.
This driveshaft loop is 4-1/2″ x 10″ inside the oval. Made from 3/16″ mild steel with twelve 2″ long threaded tubes spacing it apart. Available with zinc plated hex bolts or stainless button heads.
We've also put together a kit with 1-7/8" long spacers and thru bolts if you're not so concerned with seeing the heads of the bolts on both sides of the unit.
Pieces also available individually. You can combine other spacers and hardware with the individual plates to make the unit thicker or thinner, depending on your preference.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
