...you supply dimensions for the spindle mounting points? Thanks Dear Brian… Sorry, Brian, our kits will not fit your LTD spindle. The nose is the same, but the mounting is...
Search for pinto spindle - 27 results found
Dear Welder Series… leaf springs vs. four link
...80 pinto and 1974-78 Mustang II are identical.) See https://104.154.121.234/?s=pinto+spindle to compare. I like the 74 - 78 spindles because they are bigger and are the ones commonly used in...
Dear Welder Series… MII dropped spindle reference line
...regular spindle or drop spindles. I was always under the understanding that drop spindles use the same geometry as stock it just raises the spindle height and lowered the ride...
Mustang II Application Chart
...minus 1” for stock spindles. Dropped spindles can be use to lower the frame 2” from that. Spindle height is relative to tire size and will be close to the...
Mustang II Caliper Bracket Kit, for Camaro rotors
Brake kit for 1974 -78 Mustang II and 1974 – 80 Pinto/Bobcat spindles. This kit adapts larger 10-1/2″ Camaro/ S10 rotors and 1982 – 92 Camaro (or equivalent) calipers for...
Dear Welder Series… Hudson Jet Mustang II
...frame and the spindle height the same (12”) is great. Are you using stock (not dropped) MII spindles? You can use dropped spindles for more oil pan clearance but less...
Dear Welder Series… 1977 F100 MII?
...an MII spindle it will still be within the current hub-to-hub dimensions I have today. Based on the outside-the-frame-rail upper control arm, first and foremost, I want to first make...
Mustang II Caliper Bracket Kit, for Granada rotors
Brake kit for 1974 -78 Mustang II and 1974 – 80 Pinto/Bobcat spindles. This kit adapts larger 11″ Granada rotors and 1982 – 92 Camaro (or equivalent) calipers for a...
Dear Welder Series… Mustang II frame width min/max
...about 3/8″ lower than the spindle height. With stock spindles, you will have to c-notch about 2″ up from the bottom of the frame. With dropped spindles, you might not...
Dear Welder Series… 1973 Scout Mustang II
...roughly 8” ahead and behind ‘Z’. The bottom of the tubing should still be at MII spindle height.” I believe the last picture I sent you the other day shows...
Dear Welder Series… Custom frame dimensions for Mustang II
...use stock spindles. If you want to use 2” dropped spindles, the easy way is to have the bottom of the subframe 2” lower than spindle height from ground zero....
Dear Welder Series… 1960 Falcon Pro Touring Front Suspension
...in the center, you would probably have a kickup at the firewall. The stock spindles provide more ground clearance under the crossmember. The dropped spindles provide more oil pan clearance....
Mustang II Application Chart
...won’t affect the crossmember width.) Mock up the car at ride height and position the wheels and tires, front-to-back and at the desired track width. Compare the spindle height (the...
Horton Hot Rod History, part 6
Terry “Zeke” Maxwell is an old friend of Paul and Dorothy’s. Terry built the Pinto motor in the track T that’s in some of these pictures, but he’s probably more...
IFS: Make Your Own
...wheel/tire planned. What is the frame rail outside dimension at spindle location? Will the bottom of the frame, at the spindle location, be higher, lower, or the same height as...