Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Rear Crossmember KitProduct DetailsBrand: Welder SeriesMPN: WS15446xCountry/Region of Manufacture: CanadaA simple upper coilover/ shock mount crossmember for your rear suspension.
Crossmember kit to mount the top of coil-overs or ShockWaves in any frame that is 46″ or less between the frame rails. The 1-1/2″ x 1-1/2" x .125" wall square tube is 46″ long and will have to be cut to fit between the frame boxing plates. Anti-crush tubes are 1″ diameter, 2″ long for a 5/8″ bolt. Grade 5 bolts, 4-1/2″ long with washers and nuts are included.
Holes need to be drilled for the anti-crush tubes.
Also available with 7/16″ or 1/2" spacers and hardware to be used as a shock mounting crossmember.
A $10 fee will be added to the standard shipping charge for this item due to the size.
WS154460
WS154465
WS154467"Right Height" Vehicle Set-Up Tool, PRC$53.50"Right Height" Vehicle Set-Up Tool, PRBuild your project at ride height to confirm clearance!We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
