Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Model A Triangulated Rear Four Link KitProduct DetailsThis Model A specific triangulated rear four link kit is available welded or ready to weld. Bushing outer tubes on the lower bars are welded at a 5 degree angle to the bar to account for the tapered rear frame rails. The lower bars mount below the rails, between the supplied 3/16" frame plates.
Axle brackets are designed for 3" tubes, but we have different diameter brackets available.
Includes 3/4-16 threaded adjusters, large 1-3/4" wide bushings, hardware, and all necessary brackets.
"Right Height" Vehicle Set-Up Tool, PRC$53.50"Right Height" Vehicle Set-Up Tool, PRBuild your project at ride height to confirm clearance!We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
