Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?

Thanks
Jay
Kelowna BC

Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.

+3

Model A Parallel Rear Four Link Kit

211950

C$490.00

Available for stock and aftermarket frame rails

In stock

Quantity:

1

Add to Bag

Product Details

Brand: Welder Series

MPN: 2119

Thickness: 3/16" brackets

Bolt Size: 1/2"

Thread: 3/4-16

Length: ~23" C-C

Tubing Size: 1" bars

Welder Series carries two varieties of parallel Model A rear four bar kits. The only difference in the two kits is the frame brackets; the kit for stock-style frames incorporates the tapered rear frame rail, while keeping the bar mounting holes vertical. Kits now use the larger 1-3/4" wide urethane bushings and 3/4-16 threaded adjusters. Kits are supplied in both welded and ready to weld versions. In the ready to weld kit, the customer is responsible for all the welding.

18505
This kit is designed for Model ‘A’ Fords with the frame rail tapered from a side view. Many repro frames also incorporate this taper (Total Cost Involved, Brookville, Pete & Jake’s, and others). The bars mount below and outside the frame rail. The frame bracket holes will be about 25-1/2″ ahead of the rear axle centerline. This will clear TANKS saddle tanks. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are 1″ heavy-wall seamless mechanical tubing, tapped one end 3/4-16 RH and notched for the 21309 tube on the other end.

211950
This kit is designed for aftermarket frames using rectangular tubing rails without a taper. The bars mount below and outside the frame rail. The frame bracket holes will be about 25-1/2″ ahead of the rear axle centerline. This will clear TANKS saddle tanks. Formed rear axle brackets have 3 mounting holes for the coil-overs. Bars are 1″ heavy-wall seamless mechanical tubing, tapped one end 3/4-16 RH and notched for the #21309 tube on the other end.

Both kits include: Bars, adjusters, frame brackets (with support plate), axle brackets, bushings, and hardware.

Click here to view installation instructions.

Grant Schwartz uses a slightly modified version of this kit on F100 pickups... he notches the bars to kick the axle brackets outside the rails, then mounts the coilovers to the side of the frame.

Save this product for later

Favorite

• Search Products
• My Account
• Track Orders
• Favorites
• Shopping Bag
• Gift Cards

Display prices in: CAD

We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.

Thanks for looking at the flexibility of Welder Series part numbers.

Paul Horton