Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Master Cylinder Mount, Model AProduct DetailsBrand: Welder SeriesUnder the floor, compact master cylinder bracket mounts the brake pedal in double shear. Available welded or ready to weld.
The formed master cylinder mount is 3/16" laser cut mild steel with holes to mount either Ford or GM master cylinders. The 3/8" thick pedal mounts in double shear for strength and to make pedal removal easier – the pedal doesn’t have to slide off a pin. This, in turn, means a smaller hole in the floor. The standard pedal is offset, but boomerang-shaped arms with no offset and straight pedal arms can be substituted. The adjustable pedal mount parts are included. This kit was designed for Model ‘A’ Fords, but can be used in T-buckets and many other frames. The center of the master cylinder is 2-1/2″ off of the frame rail so a master cylinder with left hand ports should be used.
A stainless pedal pad bracket is included, but the kit can be ordered without it. If you'd prefer a 1/2-20 threaded bung instead of the stainless bracket, please order the kit without the stainless bracket and add the bung to your cart (in related products below).
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
