Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Light Switch Knob, Sweptline StyleProduct DetailsBrand: Horton Custom 3D PrintingCountry/Region of Manufacture: CanadaModeled from our 1968 Dodge shop truck and printed in black resin, sanded lightly before shipping. Not supplied polished. Depending on the level of finish you require, some final sanding may be necessary.
This knob was designed to fit Ron Francis' triangular headlight shaft. Due to variations in shafts and print tolerances, you may need to modify either the shaft or the knob slightly for a perfect fit. We recommend using an adhesive to affix the knob to the shaft. The aluminum knob on your headlight switch shaft will need to be removed - it's pressed on and can be taken off by securing the shaft in a vise and lightly tapping on it with a small hammer and punch.
Please see related parts for a replacement headlight switch threaded bezel to match.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
