Dear Welder Series…
I am fairly sure the 56″ cross-member kit is the correct one for use on my 64 Ford Falcon 2 door hardtop, but is there anything else I should be aware of? The car has a SBF motor, what motor mount kit will be required? Thanks for the help.
You are right, Todd, the 56″ kit is the one for your Falcon. You will have frame work to do after removing the spring pods.
Either of our Ford mounts will work well in this swap. Some builders like to use a stock-type insulator and buy the F018 kit. http://184.108.40.206/online-store/ford-motor-mounts-rubber-insulated/
Others like the urethane bushing which offers more resistance to engine rock. http://220.127.116.11/online-store/ford-motor-mounts-urethane-insulated/
Thanks for looking at Welder Series parts.