Tag: modify the frame

1953 International Mustang II

What do you mean, “modify the rails”?

We have had quite a few questions about installing our Mustang II kit in cars that don’t lend themselves well to a conversion. Sometimes “modifying the frame rails” is necessary. What exactly do we mean by that?

I thought I’d put together some pictures that show a few frames that have been modified to accept a Mustang II crossmember. If you have any questions about your frame or any of our parts, please email or call toll-free: 1-888-648-2150.

This Oldsmobile frame has been bottlenecked to accept our Mustang II crossmember.
This Oldsmobile frame has been bottlenecked to accept our Mustang II crossmember.
The '57 Oldsmobile has received a similar treatment, but the builder used larger diameter tubing straight forward from the firewall.
The ’57 Oldsmobile has received a similar treatment, but the builder used larger diameter tubing straight forward from the firewall.
You can see the spring clearance notch in the frame rail in this picture of the finished '57 Olds.
You can see the spring clearance notch in the frame rail in this picture of the finished ’57 Olds.
Here is a Welder Series Mustang II in a 1978 Volvo. Extra material was 'wrapped' around the existing front rails of the unibody car.
Here is a Welder Series Mustang II in a 1978 Volvo. Extra material was ‘wrapped’ around the existing front rails of the unibody car.
A '57 Ford frame has the springs mounted inside the frame rails.
A ’57 Ford frame has the springs mounted inside the frame rails.
The '57 has been cleaned up and 2x4 tubing was used to mount our MII.
The ’57 has been cleaned up and 2×4 tubing was used to mount our MII.
1953 International Mustang II
1953 International Mustang II
1953 International Mustang II
1953 International Mustang II
1940 Dodge Mustang II
1940 Dodge Mustang II
1940 Dodge Mustang II
1940 Dodge Mustang II

If you’ve put our in something “weird”, please send us some pictures!