...Decide on stock length or shortened (narrowed) control arms. The upper arm cross shafts on stock length arms will be about 29-1/2” center-to-center with a stock rotor-to-rotor face width of...
Search for brake pedal arm - 57 results found
Brake Pedals
Available straight or with a 1-3/4″ offset. 4.5:1 ratio, 3/8″ thick. Welded pedals include the pivot tube welded in place and two Delrin bushings. Brake pedals are offset to the...
Mustang II Application Chart
...kit instructions, page 6 for info regarding this decision. Decide on stock length or shortened (narrowed) control arms. The upper arm cross shafts on stock length arms will be about...
Dear Welder Series… sway bar arm mounting question
...if I use the full length of the Sway Bar Arms it would have a flatter (?) arc and cause less deflection (bending) on the sway bar. Do you see...
Testimonials
...with their customer service. I asked them if they had a brake pedal kit (mount, pivot, pedal, bushings, etc) for a right hand drive application. They did not have a...
Sway Bar Arm
Available 8″ or 12″ from the center of where the coupler would attach to the center of the 3/8″ hole at the small end. Curved/ L shaped to provide crossmember...
Lower Control Arm Mounting Kit
Got some swap meet tubular lower arms that didn’t come with the spacers and gussets? Or did the the arms you bought new not include the spacers? Here is a...
Formed Brake Booster Bracket, Long
...Designed for our WS25800 remote-mount pedal kit. The forward and bottom edges are parallel. Click to share on Facebook (Opens in new window) Facebook Click to email a link to...
Dear Welder Series… 1960 Falcon Pro Touring Front Suspension
...Paul, before I start ordering, these control arms will work with your cross-members, right? https://www.ridetech.com/store/mustang-ii-strongarms-shockwave-front-lower.html Dear Mark… These are RideTech arms. The arms for 1974 – 78 Mustangs can be...
Mustang II Caliper Bracket Kit, for Granada rotors
Brake kit for 1974 -78 Mustang II and 1974 – 80 Pinto/Bobcat spindles. This kit adapts larger 11″ Granada rotors and 1982 – 92 Camaro (or equivalent) calipers for a...
Brake Line Tab
Buy 10 of one part number, get 10% off. Buy 50+ to get them for half price! Sorry, no additional discounts applicable. For mounting flexible brake lines to the frame....
Mustang II Caliper Bracket Kit, for Camaro rotors
Brake kit for 1974 -78 Mustang II and 1974 – 80 Pinto/Bobcat spindles. This kit adapts larger 10-1/2″ Camaro/ S10 rotors and 1982 – 92 Camaro (or equivalent) calipers for...
Formed Brake Booster Bracket
Plate, booster/master cylinder mount, formed. The booster centerline is 4-1/4″ off of the boxing plate as shipped, but the bracket can be trimmed to move the booster closer. The bracket...
Contact/ Shipping Info
...get pricing on SKU WS318600 kit with substitutions. I would like to substitute the upper arms and brackets that are in this kit for the upper arms and brackets that...
Mustang II Crossmember Kit for Coil Overs/ Shockwaves
...arms, wheels, and brake system used. An easy way to estimate the stock track width is to measure tire tread center to center. The outside frame width is less critical...