...are modified, etc. If you’d like to use your own tube, we have the threaded inserts available separately. See related items. APPLICATIONS FOR DRAG LINKS 1928-32 Ford frame w/46” axle...
Search for rear 4-link - 103 results found
Four Link Kit – Pro Street
Made with 3/4″ left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames. The 1″ diameter seamless bars, with the adjusters installed, have a nominal length of 21″...
Model A Rear Crossmember
...style gives more trunk or rear seat room. Tubes are 3 x 2 x 1/8 wall HSS. End caps (#17700) are included. Available tig welded or ready to weld. The...
Model A Rear Body Mount
For model A frames that have a kicked and narrowed rear frame section. This plate can be welded outside the kicked portion so the body’s rear mount can be used....
Rear Coilover Bolt Kit, steel or aluminum spacers
Spacers are 1-3/8″ long to space the coil-over away from the rear axle. The SAE washers on the back side keep the coil-over from slipping over the bolt head. Check...
Mustang II Crossmember Plate, Rear/ Top
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts. A $5 handling charge will be added to this...
Rear axle shock mount, ea
Designed as a lower coil-over or shock mount for the rear end. Heavy-duty 3/16″ formed steel for greater strength. Use Welder Series #21854 block (see related products below) and this...
Rear Crossmember Kit
A simple upper coilover/ shock mount crossmember for your rear suspension. Crossmember kit to mount the top of coil-overs or ShockWaves in any frame that is 46″ or less between...
Dear Welder Series… custom width axle brackets?
Dear Welder Series… Good day, I am trying to source out parts for my triangulated 4 link install. These brackets in the link, what i the inner width? I am...
Four Link Bars
1″ OD bars with either 5/8-18 or 3/4-16 threads, available for large or regular bushing sizes. BAR, 1″ x .156″ or .219″ wall seamless tubing, one end tapped 5/8-18 RH...
Spreader bar flange, 32 Ford, Front and Rear
For 1932 Ford frames. Make your own spreader bars! Front and rear available. Front: Approximate size is 3-1/2″ x 1-1/2″ with one hole, 1/2″ diameter in the center and 2...
Rear Spring Hanger Kit
...be 6-1/8″ behind the rear axle tube. WS20950 Gussets are designed to mount the main plate at 90 degrees to the axle, NOT at an angle for stock 1932-34 Ford...
Dear Welder Series… 1977 F100 MII?
...are creating some challenges. The primary issue is the drag link at the rear of the crossmember. To fix this I’m considering putting in an ifs kit, however I’m weird...
Sway Bar Kit, Trim to Fit, 3/4″ Bar
...connect the arms to the tabs that weld to the rear end or frame. Overall length is ¾” longer than the bar length, since the 3/8″ arms mount outside the...
Urethane Bushing Outer Tube
...long. For standard bushings (#1203 from Pete & Jakes and #9.9106 from Energy Suspension), including engine mounts, front four link kits, and rear standard bushing four link kits. Tube for...