...he decided to install air ride all the way around and lay frame, a step notch kit was in order. Jeff had purchased our rear four link kit and some...
Search for rear 4-link - 103 results found
Four Link Axle Bracket Kit for F9000 Air Springs
For combination 4-link and lower air spring mount on 3″ or 3-1/4″ axle tubes. Holes for the 4-link are ½” diameter on 5½” centers. The 4-link holes are 2½” ahead...
Rear Panhard Kit for 8″ or 9″ Ford
Panhard kit, 8″ or 9″ Ford, rear, complete with bar, hardware, frame tabs, and pinion plates. For a centered pinion. Necessary with a parallel four link to limit side-to-side movement...
Testimonials
...to thank DW for answering my questions about the Triangulated 4-Link kit. He was very friendly and knowledgeable. I also would like to comment on the assembly tips, drawing and...
FOUR LINK KIT – FRONT, 1928-34 Ford
...Kit includes all parts to make a complete four link kit. 1932-34 Ford, fenderless: Designed for fenderless cars. The lower bars mount 2-5/8″ below the frame. The upper bar adjuster...
Axle Bracket, Parallel Four Link, EA
Axle Bracket, rear, for combination 4-link and lower coil-over mount or shock mounts. (Use Block #21854 to support the bolt when coil-overs are used.) Holes for 4-link are ½” diameter...
Parallel Four Link Axle Bracket Kit
Axle Brackets, rear, for combination 4-link and lower coil-over mounts. Holes for 4-link are ½” diameter on 5-1/2″ centers. Coil-over mounting holes are backed with a 1” square block for...
Universal Panhard Kit, Rear
An easy-to-install rear panhard kit designed for a wide variety of applications. This kit can be used with most rear ends because it has a bracket that welds to the...
Upper Frame Bracket for Triangulated Four Link
Comes off the frame at a 27° angle, but can easily be trimmed for a different angle, if required. As used in our triangulated rear 4-link kit. Hole is 1/2″...
Lower Four Link Frame Bracket Plate
Used in our triangulated and parallel rear four link kits. Length: 10-1/2″ Width: 4″ Height: 3″ Facebook Email Pinterest Print...
Dear Welder Series… Front four link brackets?
...are using a 9″ ford rear. I watched your video about the 4-bar brackets using one piece of plate & laser cutting the folds. Very interesting. Do you also make...
Dear Welder Series… 4 link custom bars?
...the center of the rear axle to the hanger hole. We will work out the bar length, taking into account the axle bracket and the adjuster. (We dimension bars from...
Lower Frame Bracket Kit – Triangulated Four Link
As used in our triangulated four link kit for the lower bar. Formed bracket has 1/2″ holes. Neatly TIG welded. To purchase the unwelded pieces, please see the Related Parts...
Frame Bracket Kit – Parallel Four Link
...bushings are individual 3/16” plates (see picture). Frame plates are 3/16″. Designed for 1932-34 Ford rear 4-link but has been used in many other applications. Note the cut-out in the...
Model A Rear Crossmember
...style gives more trunk or rear seat room. Tubes are 3 x 2 x 1/8 wall HSS. End caps (#17700) are included. Available tig welded or ready to weld. The...