Rear Crossmember Kit
A simple upper coilover/ shock mount crossmember for your rear suspension.
Crossmember kit to mount the top of coil-overs or ShockWaves in any frame that is 46″ or less between the frame rails. The 1-1/2″ x 1-1/2" x .125" wall square tube is 46″ long and will have to be cut to fit between the frame boxing plates. Anti-crush tubes are 1″ diameter, 2″ long for a 5/8″ bolt. Grade 5 bolts, 4-1/2″ long with washers and nuts are included.
Holes need to be drilled for the anti-crush tubes.
Also available with 7/16″ hardware to be used as a shock mounting crossmember.