Dear Welder Series…
Hey, I’m looking at your 4 link pro street kit, and would like as well a kit for coil overs and panhard bar, for a 31 Ford with 9 inch rear, will be using the stock rear cross member, thanks for your help.
Jim, the upper bars on the pro/street kit are going to be in the way of the Pan
hard kit if the Panhard is mounted on the front of the 9″ Ford. The coil-overs will probably interfere if the Panhard is on the rear side. We used to use a diagonal bar from the driver’s side frame bracket to the passenger side axle bracket. These have to be custom made once the 4-link has been installed.
We have a coil-over crossmember (shown here)…
…and a coil-over mounting bolt kit
Thanks for looking at Welder Series parts.