Dear Welder Series…
Paul,
Kevin here, sorry I missed your call earlier. As I said previously, I’m doing a custom front end using your mustang ii crossmember kit for coil springs. I am using 2×4 channel for the main frame rail and am looking for either the cut diagram, or just the dimensions I need to trim both the cross member and the shock tower mounts. To give you an idea, I will be doing something that looks a lot like the build linked below. I am available in the morning Monday and Tuesday next week if it would be easier to discuss on the phone.
Kevin
Dear Kevin…
I think this is what you want. If you want to talk about it, please send me another email and I’ll call you.
Thanks for using Welder Series’ parts.
Paul
Dear Welder Series…
I do believe that is what I need. Thank you very much. Based on the drawings, does the bottom of the tower bracket line up with the notch on the inside of the crossmember?
Dear Kevin…
Yes, it does, Kevin. And, that’s also where the stock spindle will be with all the weight on the front end. (Ride height)Paul
Dear Welder Series…
Paul,
I accidentally gave you the wrong dimension for the frame. It’s 2×3, not 2×4. I should just add back an inch on the upper tower cutout to make it line up with the notch and it should be good, correct?
Kevin
Dear Kevin…
Kevin, you are correct. On the towers, use 3” instead of 4”.Paul