Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Air Spring Axle BracketProduct DetailsBrand: Welder SeriesMPN: 21870Thickness: 3/16"Hole size: 3/8"Mounts many rear air springs.
Air spring axle bracket, for #F9000 and similar air springs. Formed to weld to a 3″ diameter axle tube but will easily fit smaller or larger tubes. The edge that welds lengthwise to the axle tube is scalloped to reduce heat build-up when welding. The air spring mounting surface is the same height as the axle tube centerline.
This bracket can be used with the 474208 upper air spring bracket. About 5-1/4” wide with 1 hole, 3/8” diameter, 3” from the edge of the axle. The radius opposite the axle end is 2.5" from the hole centreline.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
