Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Four Link Axle Bracket Kit for F9000 Air Springs, PRProduct DetailsBrand: Welder SeriesMPN: 477601-2Thickness: 3/16"Bolt Size: 1/2"For combination 4-link and lower air spring mount on 3" or 3-1/4" axle tubes. Holes for the 4-link are ½” diameter on 5½” centers. The 4-link holes are 2½” ahead of the axle centerline. The airspring plate is the same height as the rear axle centerline. It is designed with a 3/8” center hole for the Firestone F7012, F7076, or F9000 airspring. Note that separate shock mounts are required. (See related products) These brackets can be substituted in our rear 4-link kits for the cost difference. The part number is for 2 brackets.
Only available for large (1-5/8" diameter) bushings. You could use small bushings, but the radius around the bolt holes wouldn't match.
Welded brackets will be set up for 1-3/4" wide bushings.
Triangulated Axle Bracket Kit, PRC$112.00Triangulated Axle Bracket Kit, PRFor 3" or 3-1/4" axle tubeWe would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
