Online Store

Mustang II Crossmember Kit for 1948-52 Ford F1 Pickups

SKU 665118
In stock
Product Details
Track Width: 60-1/2"
Brand: Welder Series
Model: 1948-52 Ford F1
MPN: 665118
Country/Region of Manufacture: Canada
Thickness: 3/16" plates
Bolt Size: 5/8" lower control arm holes

Designed as a direct fit for your 1948-52 Ford F1 pickup. Available for standard coil springs/shocks or for conventional (not Mustang II) coil overs. The welded option will get you a fully welded crossmember and upper towers. In the coil over version, the coil over mounting plates are supplied loose because they are designed to be trimmed for the ride height of your particular coil over. Our instructions will walk you through the process. Please note; the kit does not come with any of the additional parts shown in the coil over version pictures (rack, coil overs, spindles, etc.).

- 5/8" lower control arm bolt holes, ready for your tubular A arms.
- Includes 3/16" frame boxing plates.
- Lower control arm mounting tubes and gussets are included (and welded in the welded version)

Our crossmember will put the bottom of your frame at spindle height when using stock spindles. Please see our installation instructions and diagram: click here.

Rack extensions should be used, 2" per side.

Optional #24410 power rack spacer kit includes spacers and hardware to correctly position your 1979-93 Mustang II power rack so the input shaft clears the crossmember.

Please see related products for brake caliper mounting kits.

Save this product for later