Dear Welder Series:
Hi Paul. Do you have any suggestions for frame brackets for my hair pins? Model A frame is boxed.
Thanks: Ward

Dear Ward:
If you are using a tie rod end, we have this through-the-frame mount:

If you are using a urethane bushing in an adjuster, here are 2 suggestions:

with a spacer to keep the sides from collapsing when the bolt is tightened:

or,
A similar bracket, not pictured, but used in our ’32 Ford front 4-link kits.  It’s available so the hole would be 4″ down from the frame.

Paul