Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Upper Frame Bracket for Triangulated Four LinkProduct DetailsBrand: Welder SeriesMPN: 318590DCountry/Region of Manufacture: CanadaThickness: 10 gaHole size: 1/2"Comes off the frame at a 27° angle, but can easily be trimmed for a different angle, if required.
As used in our triangulated rear 4-link kit. Hole is 1/2″ diameter. The short side is 2-5/16″ from the frame to the hole center. The long side is about 5-1/16″. 10 gauge mild steel.
Sold individually or in pairs. Available for large (1-3/4" wide, 1-5/8" OD) bushings. Small bushing brackets have been discontinued. Spacers or extra washers can be used to mount the 1-3/8" wide bushings in the 1-3/4" wide brackets.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
