Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Rear Panhard Kit for 8" or 9" Ford, Pinion MountProduct DetailsBrand: Welder SeriesMPN: WS269210Thickness: 3/16" axle plates, 10 ga frame tabsBolt Size: 1/2"Thread: 5/8-18Length: VariousTubing Size: 7/8" x .156"Panhard kit, 8″ or 9″ Ford, rear, complete with bar, hardware, frame tabs, and pinion plates. For a centered pinion.
Necessary with a parallel four link to limit side-to-side movement of the rear axle.
All lengths are for a centered pinion. The bar length should be 3/4" longer for a centered housing.
Model A Ford, stock frame: 32″ ID
1932 Ford: 38″ ID
1933-40 Ford: 40″ IDPlease select your application from the drop-down menu.
For custom applications using a Ford 8" or 9" rear end: “X” is the distance from the driver boxing plate to the differential carrier bolt at the top/middle. Bar length will be X + 2-3/4”.
Bolt-on rear end brackets, weld-on frame tabs, bar, adjuster, hardware.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
