Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.PANHARD KIT - FRONT 28-34 FordProduct DetailsBrand: Welder SeriesMPN: 220257Diameter: 5/8" tubeThread: 3/8-24 LH/RHLength: VariousKits available for 1928-1934 Ford with either a 46" or 48" axle. We can do custom length bars as well.
The Panhard kit keeps the frame from moving sideways, giving much improved handling. The steering will be more responsive, too. The bar in this kit will be about the same length as the drag link when a Vega cross-steer is used. The frame brackets weld under the driver’s rail. The rear frame bracket is formed for extra strength. The “axle” brackets actually weld to the passenger side batwing. The bar is 5/8″ OD seamless tubing. Rod ends are 3/8″ left & right hand thread. Various lengths for different frame and axle combinations. This kit is designed for batwings with flat, steel batwing side plates. It will not work with “GT” style Stainless batwings.
Parts Included:
Price includes bar, frame brackets, axle bracket tabs, rod ends, and all hardware.We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
