Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.GM Transmission Insulator, rubber or polyurethaneProduct DetailsBrand: Welder SeriesMPN: 2268For GM T350, 400 & 700R4, T56 and many others. For other transmissions, use our 205043 adapter plate.
https://welderseries.com/dear-welder-series-t56-mount/
Upper holes are for 7/16″ bolts and are slotted for 3-1/2″ – 4-1/2″ centers. The lower holes are 7/16-14 on 1-1/2″ centers. The insulator is 1-7/8″ tall.
We now stock the Energy Suspension polyurethane mount. It is stiffer than the rubber insulator, and will hold the transmission more securely than the rubber mount. I used rubber engine and transmission mounts on the '32 when I built it. After switching to urethane engine and transmission mounts at 35,000 miles, I highly prefer the urethane. They greatly reduced engine rocking on startup and acceleration; this helped keep the car from "jiggling" at idle.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
