Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Four Link Kit - Pro StreetProduct DetailsBrand: Welder SeriesMPN: WS212480Thickness: 1/4" bracketsBolt Size: 6 @ 5/8" and 2 @ 1/2"Thread: 3/4-16Tubing Size: 1" ODMade with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames.
The 1″ diameter DOM bars, with the adjusters installed, have a nominal length of 21″ center-to-center. The brackets are 1/4″ pickled & oiled mild steel. The adjuster bolt holes are 5/8″ except for the front upper holes which are 1/2″. This allows finer upper bar instant center angle adjustment. Heavy-duty, 1-3/4″ wide urethane bushings and inner sleeves are included. The axle brackets have a 1/2″ hole to mount the coil-over and a 3/8″ hole to mount a sway bar.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
