Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Four Link BarsProduct DetailsBrand: Welder SeriesCountry/Region of Manufacture: CanadaDiameter: 1"Thread: 5/8-18 or 3/4-16Length: Various1" OD bars with either 5/8-18 or 3/4-16 threads, available for large or regular bushing sizes.
BAR, 1″ x .156" or .219" wall seamless tubing, one end tapped 5/8-18 RH or 3/4-16 (about 2-3/8″ deep) and the other end notched 1-3/8″ or 1-5/8″ diameter to take a tube for urethane bushings. A welded bar has the urethane bushing tube TIG welded on at 90 degrees (usually called “straight”). The thread is machined directly into the tubing (weld-in bungs are not used).
Also available threaded both ends.
Bars are measured from the center of the urethane bushing eye to the threaded end of the bars. The center-to-center dimension will be about 1-5/8” longer than the bar.
Custom bars can be made to order.
5/8-18 bars are only available welded.
Unwelded bars do not include urethane bushing tube. Please order separately. Welded bars include the urethane bushing tube.
Order urethane bushing kits separately.
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
