Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Brake Pedal, StraightProduct DetailsBrand: Welder SeriesThickness: 3/8"Straight pedal, no offset, 5.75:1 ratio, 3/8″ thick. Can be bent to clear the steering column and used as either a brake or clutch pedal. If used as a hanging pedal, a hole will need to be drilled on the opposite side of the pivot for the plunger.
Often used in T Buckets, Model A Fords, and Pro/Street cars.
Available welded and ready-to-weld. See related parts for #21252-A 1/2-20 threaded tube for brake pedal pad. Delrin bushings not included (see related parts below).
We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
