Dear Welder Series…
Looking for a Mustang 2 type cross member for a 37 Dodge D5 coupe. Can’t find anything on your site. Would you have such a thing? Price and how much to ship to A0L 1A0?
Dear Gary…
Your Dodge frame has a high curve over the front axle which makes it more difficult to install a Mustang II front end. It would be good to read our instruction sheets. https://shared-assets.adobe.com/link/17afad9a-b219-4191-7cfb-7ee4bfa6277c/?file=Coil%20Spring%20Mustang%20II.pdf , and eye-ball “ambush” areas. It might be necessary to add to the bottom of your frame to mount the crossmember and then trim off the top of the frame to mount the upper towers.
The kit you use will depend on the track width you want and if you plan to use stock-style springs and shocks or coil-overs.
Thanks for looking at Welder Series parts. Once you decide on the kit you’d like, we can dial in the freight cost.
Paul Horton
Dear Welder Series…
Thanks for your informative reply. I will have a closer look at what I have and go from there. Now I said Mustang II front end, but it doesn’t have to be. Is there something else that would an easier install using the stock rails?
Gary
Dear Gary…
A nice thing about the Mustang II is that new parts are readily available. Coil springs and coil overs are available with a wide range of rates so that the front end gets installed knowing that the ride height and the ride quality you want will happen when the vehicle is finished.
Another advantage is that most, often all, sheet metal, bumper, and rad mounting holes can be used because the MII gets installed in the stock frame.
I hope this info helps.
Paul Horton