Tag: Ford motor mounts

Dear Welder Series… large bushing motor mounts?

Dear Welder Series…
On your Ford motor mount kit do you use the big urethane bushings? If so, can I buy a motor mount kit without the bushings and sleeves as I already have a set here I bought earlier from Welder Series.

I would like to have the kit un-welded. All steel parts except the bushings (and bushings sleeves of course)

Thank you,
Louis

Dear Louis…
Louis, the 2050 kit used the smaller urethane bushings. You could piece a kit together to use the large bushings. I’m sending this list of parts in a separate email.

Paul Horton

Dear Welder Series… 4.6l in a ’65 Mustang?

Dear Welder Series…
Hi,
I was wondering how long it typically took to receive the “Ford Motor Mounts, 4.6L/5.4L/Coyote, Urethane Insulated” kit that you have to offer on your site? My project car is up in Pennsylvania so I am not certain what I need at this time, but it looks like your kit might do the trick.

Just some background…  I am putting a 4.6l mod motor into a 65 mustang. In this setup, would the welded kit work properly to allow me to get the engine as far back towards the firewall as possible? Not sure how much leeway your kit provides for backwards/forwards positioning.

Thanks!
Erik

Dear Erik…
Erik, our 4.6l kit can be installed where ever you want it along the frame rails. Kits are normally in stock and would take about 3 days to get to you from our place.

Thanks for looking at Welder Series parts.