Sometimes planning ahead can be a pain in the behind. A long time ago, before the rear end was painted, we decided to drill a hole for the breather. Great idea, we thought. It looked pretty slick, right between the four link brackets like it was supposed to be there. Fast forward to a few weeks ago (yes that makes sense if you think about it), and now there is a sway bar tab right over the breather hole. In order of priority, the sway bar tab wins. I had tacked it in place from below, and I didn’t notice/didn’t remember that the breather hole was there too.
I removed the tab, filled the hole, ground it smooth, and welded the sway bar tabs permanently. Then we had to choose a new location for the breather. As it turns out, it was a good thing we waited to install it; Garth Webb, a builder from next door, brought over this mini stainless breather for us to use! The holes in the sway bar tabs are 3/8″, so you can get an idea of how tiny this little guy is.