Tag: 1957 Ford pickup

Dear Welder Series… 1957 F100 Mustang II

Dear Welder Series…
I’m building a 1957 F100, and would like to use some of your products, but I have a few questions.

I want to use your mustang 2 crossmember with coil overs, but I’m wanting to set the ride height of the truck pretty low, so clearance for wheels in turning becomes a concern. Would I be better off using your middle width m2 crossmember, and modify my frame, to pull the wheels in a bit? I also don’t have the wheels I’m planning to use, as I’m not quite sure what to order on backspacing. Any suggestions for that?

Thanks,
Shane

Dear Shane…
Hi, Shane. Thanks for asking but I’m not sure that I’ll be much help. Back when we built customer projects, we used 60-1/2” kits and 7” wide wheels. There was always lots of clearance.

Because you don’t have the wheels/tires, I’d suggest working on other areas of the project until you have had time to check out more vehicles at events to see what’s been used and how that was managed.

Thanks for looking at Welder Series parts.
Paul Horton