When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
Available with black or stainless button head bolts.
From the outside of the frame rail, the look is traditional but without the bracket protruding below the frame. On the inside, only a button head shows.
Hairpin wishbone mounting kit to attach an early Ford tie rod end (not included) on a split radius rod or hairpin through a 2″ wide boxed frame. The unique taper lock keeps the inside of the frame rail clean and supports the tie rod end along the whole tapered section and all the threads. Only a button head shows – no cotter pin to snag the cleaning rag or cut your knuckles!
Kit includes parts for both sides: 2 frame bungs, 2 tapered adapters, 2 threaded couplers, 2 split pins, 2 internal tooth lock washers and 2 1/2-20 button head bolts. Early Ford tie rod ends are NOT included.
