When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
Holes for the urethane bushings are ½" diameter on 5-1/2" centers. Brackets for the large urethane bushings are 10 ga. mild steel pickled & oiled and formed for extra strength. Brackets for small bushings are individual 3/16” plates (see picture). Frame plates are 3/16".
Note the cut-out in the gusset to clear the bar. Mount inside or outside the frame rail, depending on the width of the frame. Brackets for both sides are included.
Available for both 1-3/8″ wide bushings and 1-3/4″ wide bushings.
Shown welded.
