Problem solving hot rod chassis parts for 40 years.
Old Products: threaded stuff
When we ran a full service chassis fab/turn-key hot rod shop a number of years ago, it was always useful to have threaded things around to weld into the frame for some kind of mount, etc.
Here’s a list of all our threaded things for your reference:
+3
Four Link Kit - Pro Street
WS212480
C$500.00
In stock
1
Product Details
Brand:Welder Series
MPN:WS212480
Thickness:1/4" brackets
Bolt Size:6 @ 5/8" and 2 @ 1/2"
Thread:3/4-16
Tubing Size:1" OD
Made with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames.
The 1″ diameter DOM bars, with the adjusters installed, have a nominal length of 21″ center-to-center. The brackets are 1/4″ pickled & oiled mild steel. The adjuster bolt holes are 5/8″ except for the front upper holes which are 1/2″. This allows finer upper bar instant center angle adjustment. Heavy-duty, 1-3/4″ wide urethane bushings and inner sleeves are included. The axle brackets have a 1/2″ hole to mount the coil-over and a 3/8″ hole to mount a sway bar.
