Dear Welder Series…
I’m building a 1930 Model A on boxed ’30 frame. I want to use your flat crossmember in order to use a 1936 wishbone with the spring forward of the axle.
I want to know if I can place your flat crossmember in front of the stock cross member in order that I may keep the original design, i.e. radiator and fenders etc…??
Has anyone done this before??
I want the car as low as possible and the use of the intact ’36 wishbone. I intend on using cross rack steering and need the clearance as well.
Thanks,
Mike
Dear Mike…
Thanks for looking at Welder Series’ parts.
Our flat front crossmember is designed for a 1-3/4″ wide spring, like the 1928-34 Ford. The ’36 Ford used a 2″ wide front spring, so it will not fit in our crossmember. The ’36 spring is longer than the Model ‘A’ spring, so it can’t be adapted to the ’36 stock wishbone, either.
The ’36 axle will be a little wide to let you get the front end low. (The tires will be out at the edge of the fenders.) You might want to mock up your parts to see how it looks before buying any parts. The standard way to get a Model ‘A’ low is to use a 46″ dropped axle with a reversed eye spring with a low arch.
I hope this helps.
Paul Horton
Dear Welder Series…
Thanks Paul…….I already have the 31″ 1 3/4 reverse eye spring with a 6″ arc, now I need the 46″ axle. I wanted to use the 1936 wishbone unsplit but I guess I will have to split it after all.
Thanks again,
Mike
Dear Mike…
Mike, you might be able to use the wishbone unsplit and just cut off the spring perch extensions. The spring would mount above the axle.
Paul
Dear Welder Series…
YES, that’s what I intend on doing I just have to find the widest perch possible on the “I” beam. The wishbone is 39.5″ apart and the “I” beam I have is 36″ and I have a feeling that the 46″ axle will also have around 36″ between bosses. Maybe I can bend the wishbone to match the bosses when I get the 46″ axle.
Worse scenario is splitting the wishbone…………..
Since I have you online, do you guys sell “X” crossmember for the model A frame? I need something for my 4L60 transmission to bolt onto. I’m running a 283 cu. in. motor as well and will also need the motor mounts to weld to the frame and attach to the motor, side mounts.
I have a 1930 model A frame that is completely stepped up and boxed. I have a center cross member but I would like to reinforce the frame a little more and have the setup to bolt on the brake pedal, etc..
Thanks again,
Mike
Dear Mike…
Mike, most 46″ axle perch centers are about 34-1/2″. You should be able to bring the wishbone in to match the 46″ axle perches. Make sure the ball stays in the center.
We don’t have a Model ‘A’ x-member. Check Dagel’s https://dagels.com/super-x-crossmember-kit/. Welder Series does have Chev motor mounts.
This motor mount kit is specifically designed for the Buick Baby Nailhead engines, including the 264 and 322 cubic inch models. Whether you’re restoring a classic or building a custom hot rod, this kit offers a durable, high-strength solution to securely mount your engine.
High-Quality Materials and Construction:
- Main Plate: The heart of the kit is a laser-cut main plate, crafted from 1/4" thick pickled and oiled mild steel. This treatment ensures a clean surface that's ready to weld and more resistant to corrosion. The plate also features a formed lip along the top edge, providing added rigidity and strength for demanding applications.
- Frame Plates & Gussets: The included frame plates and gussets are made from 3/16" thick steel, offering both flexibility and strength. The frame plates are trim-to-fit, giving you the freedom to custom-size them to your specific frame once you’ve positioned the engine, ensuring a perfect fit every time.
Smooth Vibration Absorption:
- Urethane Bushings: This kit includes urethane bushings that connect the engine mounts to the frame plates, delivering excellent vibration dampening to ensure smoother operation and reduce stress on your engine and frame components.
Complete Kit for Ease of Installation:
- What’s Included:
- A pair of engine mounts
- Four trim-to-fit frame plates
- All necessary hardware, including Grade 5 zinc-plated bolts, ensuring durability and resistance to corrosion.
The kit is available in two options: welded (TIG-welded for precision and strength) or ready-to-weld, giving you flexibility based on your project needs. Whether you prefer to handle the welding yourself or want a ready-made solution, we’ve got you covered.
With high-quality materials and precise engineering, this kit ensures a solid, reliable engine mounting setup for your Buick Baby Nailhead engine. Proudly made by Welder Series, this kit delivers exceptional performance, making it a trusted choice for builders worldwide.
Our Model ‘A’ manual brake pedal is at:
I hope we can help with your project.
Paul Horton