Dear Welder Series…
Looking at the brake booster kit WS24806. Can you get the same kit but with a pedal arm that is flat with no kinks or bends. If so, will it be the same price?
Thanks
Jay
Kelowna BC
Dear Jay…
We can sub any pedal in the kit Jay. Here are the parts and pieces of pedal kits.Front Clamp Plate & U-Bolt KitProduct DetailsBrand: Welder SeriesMPN: WS15700Thickness: Main plate 3/8", spacer 1/4".Bolt Size: U-bolts are 1/2-20Clamp Plate and U-Bolts. For 1928-34 Ford stock or repro front crossmember with a transverse spring. Repro front springs usually have fewer leaves than the original, making them thinner. The clamp plate spacer gets welded to the base plate to make up the extra thickness so the clamping action is on the spring leaf, not on the crossmember.
The spacer plate welds to the clamp plate at each end only.
Since it is only a spacer, and goes between the clamp plate and the spring, the weld is only holding the 2 pieces together. There isn’t any strength requirement to this weld.Parts included:
Plate, clamp plate base, 4 holes are 1/2″, center hole is 9/16″. This clamp plate will not fit original u-bolts, 15702, 1
Plate, 3-1/2 x 1-3/4 x 1/4″ thick. Spacer for clamp plate, 15703, 1
U-bolt, 1/2″ x 2-1/2″ x 3-1/2″ long legs. These u-bolts do not fit the stock 1928-34 Ford clamp plate, 200210, 2
Nut, 1/2-20 right hand thin nylok, zinc plated, N08FRNTZ, 4We would credit the arm #213211 (standard in the kit) and invoice for the pedal you want.
Thanks for looking at the flexibility of Welder Series part numbers.
Paul Horton
