Dear Welder Series…
Hi recieved your catalog building a 1935 Chev pickup streetrod just getting an order together need some measurements before hand. Kit #WS24806 booster bracket and pedal kit what is distance off frame to center of booster? On your offset pedal how much offset center pin to center of pedal mount? Also kit #2220 four link kit axle center to center of front bushing mount? thanks so much Tony

Dear Tony…
Here are some links to expand on my answers, Tony…
The booster center is 4-1/4″ off of the boxing plate. The pedal pad mounting hole is 2-1/4″ towards the center of the frame from the booster center. (I hope that’s the answer to your question.)
The pedal arm comes through the floor 1″ towards the center of the frame from the booster center and the arm is 3/8″ thick. The floor slot should have clearance around the 1″ – 1-3/8″ pedal.
On our rear 4-link kit 2220 (and 222501), the center of the front bushing will be about 27-5/8″ to 28″ ahead of axle center.

Click here for installation instructions.

Thanks for these questions.