Mustang II Crossmember Kit for 1948-52 Ford F1 Pickups


Mustang II Crossmember Kit for 1948-52 Ford F1 Pickups 665118

Designed as a direct fit for your 48-52 Ford F1 pickup.

- 5/8" lower control arm bolt holes, ready for your tubular A arms.
- Includes 3/16" frame boxing plates.

Our crossmember will put the bottom of your frame at spindle height when using stock spindles. Please see our installation instructions and diagram: click here.

Rack extensions should be used, 2" per side.

Options include #24410 power rack spacer kit which includes spacers and hardware to mount your power rack so the input shaft clears the crossmember, and #213070 lower control arm mounting kit which includes four tubes - two for inside the crossmember and two for behind the crossmember, and two gussets for the rear tubes. If your lower A arms didn't come with tubes and gussets, this kit is an option for you.

Please see related products for brake caliper mounting kits.

$577.5 In stock
Brand:Welder Series
Model:1948-52 Ford F1
Country/Region of Manufacture:Canada
Thickness:3/16" plates
Bolt Size:5/8" lower control arm holes
Track Width:60-1/2"
Option 1 Welded (0) Ready to Weld (0)
Option 2 Add power rack spacer kit (24410) (24) Add lower control arm mounting kit (213070) (50)
Welded tower and crossmember. Ready to weld crossmember plate, supplied flat. Ready to weld crossmember/ inner boxing plate. Ready to weld upper tower piece.