Online Store

Engine Mount Kit; small block Ford, urethane bushed

In stock
Product Details
Brand: Welder Series
MPN: 2050
Country/Region of Manufacture: Canada
Thickness: 3/8" engine plates, 3/16" frame plates.

Motor mount kit for Ford small block (260, 289, 302, 5.0, 351W, 351C, 400). These mounts use our large 1-3/4" wide urethane bushings to insulate vibrations. Note: If your block has three threaded mounting bosses, the middle one may need to be trimmed if it sits proud of the outer two, or you can use spacers to clear the center boss. 7/16" bolt holes are 7" on center.

3-9/16" from bushing center to 7/16" bolt centerline. Frame plates are 6" from frame edge to 1/2" bolt center.

Use in boxed frames. Parts & hardware included to make 1 pair of motor mounts. Available fully tig welded or ready to weld.

Check out the related products for a neat filler plate to go between the frame plates.

Follow Lowdown Hotrods as they install this motor mount kit in a ’32 Ford.
Motor Mount Tech Tips
Installation Tips

Save this product for later