Dear Welder Series…
Hi, I’m looking at your mustang II crossmember kit, and I’m wondering if it would be appropriate for a 54 Chevy that I want to bag and have lay on the ground.  Can I get it low
enough with your cross member, or would I need to look at Z-ing the frame?

I’ve got a donor Mustang II that I’ll be getting the arms and whatnot off of to use for this project.

Also, how is shipping to the states?  Is it reasonable, or prohibitively expensive?

Thanks,
Jake

Dear Jake…
Jake, our kit is great for a project like yours because you notch the crossmember and towers to get the ride height you want. The step-by-step instructions will guide you through the whole installation.

Your donor parts (1974-78 Mustang II) will work fine. Order the strut rod bracket kit #108140 if you plan to use the stock strut rods. You will also need 2 of the #12202 c-notches to clear the rack bellows.

 

 

Thanks for looking at Welder Series parts.

Paul Horton

Dear Welder Series…
How about shipping to the states, is that reasonable?

Thanks,
Jake

Dear Jake…
Sorry I missed that, Jake, ’cause it easy to calculate and, we hope you agree, is quite reasonable. Freight from our door to your door is 10% of the order, a minimum freight charge of $15 and a maximum charge of $60.00.

Paul