Problem solving hot rod chassis parts for 47 years.
35-40 Ford Direct Fit Mustang II
We’re happy to introduce a Welder Series Mustang II kit that you can install in your 35-40 Ford without having to trim the crossmember, upper towers, and coil over mounting plates.
Designed for coil overs, this nicely fabricated kit includes upper control arm towers with anti-dive built in, precut upper coil over mounting plates, and the lower control arm tubes/gussets welded.
It gives you a head start on the front suspension installation!
Any components designed for a Mustang II will work with our crossmember.
I just wanted to know if the cross member and upper coil spring towers are cut for my truck frame and come designed with the proper geometry/anti dive etc or would I have to trim to fit.
Dear Welder Series... Interested in your mustang II crossmember with coil overs. How much does the crossmember weigh and how wide is it outside to outside at the lower control arm mount? Thanks. Steve. Dear Steve... The 56" crossmember kit (shown below) with the upper arm brackets and coil-over mounts weighs…
Dear Welder Series... Good day aye, I would like to purchase your cross member for my 1962 Studebaker Lark station wagon. Running into issues with frame measurements. The “Z” mark is running through the shock tower preventing me from getting accurate measurements. Also, the frame goes in and out, up…
