...to mount Ford C4, C6, AOD & Mopar transmissions with 2-3/4″ mounting hole centers. See Related Parts below for the Ford/Mopar adapter plate. The formed saddle bolts to the flanges...
Under the floor, compact master cylinder bracket mounts the brake pedal in double shear. Available welded or ready to weld. The formed master cylinder mount is 3/16″ laser cut mild...
...and 2-3/4″ out from the frame. Please see related products for a plate to make this kit into a bolt-on shock mount. Parts Included: Shock mount frame plate, 10301, 4...
From Energy Suspension: Uses softer 70A Durometer bushings which is best for applications which require a higher degree of insulation. Universal transmission mounts, motor mounts, cab & body mounts, restorations,...
...does the 2002 Ford 4.6 motor mounts come as a complete set? I want to buy the pre-welded mounts but the advertised photo shows only one mount, 2 bushings, a...
...drop engine swap crossmember for use as a transmission mount instead. The tranny mount and the reinforcement tabs I received look like they will be more than adequate for this....
For model A frames that have a kicked and narrowed rear frame section. This plate can be welded outside the kicked portion so the body’s rear mount can be used....
Designed for 1-1/2″ tube, but can be modified to fit slightly larger diameter tubing. 3/16″ pickled & oiled mild steel. 3-¾” x 1-3/8″ with 2 holes, 7/16″ dia on 2-¾”...
...(with 4 mounting bolts on each side of the block). The main plate is 1/4″ mild steel with a formed upper edge for increased strength. The 3/8″ mounting holes are...
Designed for 1″ or 1-1/2″ round or square tube center sections. The main plate has slots on 1-1/2″ centers to take a GM insulator. The gussets will support the plate...
Parts included: Engine mount assembly (available artfully TIG welded or as pieces which you can weld together without special fixtures) 4 frame plates, long enough to fit in pretty much...
Our latest LS engine mount kit which uses large 1-3/4″ wide urethane bushings and a slick gusseted design. Fully TIG welded, also available unwelded. 1/4″ main plate with 3/16″ gussets...
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts. A $5 handling charge will be added to this...
...height and rake when mounting the motor/trans. . On MII suspended chassis, have the rack mounted. It is usually higher than the crossmember and can interfere with the oil pan....
...kit which includes support bars and tabs to mount this bracket to a tube. Click to share on Facebook (Opens in new window) Facebook Click to email a link to...